原表面回热器换热阻力特性试验研究  

EXPERIMENTAL INVESTIGATION OF FLOW AND HEAT TRANSFER IN A PRIMARY SURFACE RECUPERATOR

作　　者：梁红侠[1,2] 杜林秀[1] 马挺[1] 曾敏[1] 王秋旺[1] 

机构地区：[1]西安交通大学动力工程多相流国家重点实验室,陕西西安710049 [2]西北工业大学动力与能源学院,陕西西安710072

出　　处：《工程热物理学报》2009年第12期2110-2112,共3页Journal of Engineering Thermophysics

基　　金：国家"863计划"能源技术领域燃气轮机重大专项(No.2007AA050501);教育部霍英东教育基金会高等院校青年教师基金资助项目(No.91056)

摘　　要：本文对研制加工的适用于100 kW微型燃气轮机的CW(Cross Wavy)原表面回热器进行了试验研究,通过对两侧流体进、出口温度、压力等的测量,重点分析了燃气流量、入口温度及空气进口压力变化对换热阻力的影响,得出了在变工况下回热器的流动与换热性能规律,结果表明:所研制的CW原表面回热器空、燃气两侧换热均匀,提高了换热效率,两侧压降都有不同程度降低,并得出了有工程应用价值的Nu-Re及f-Re准则关系式,可为原表面回热器的设计制造提供参考。An experimental study of flow and heat transfer characteristics of a CW primary surface recuperator for a 100 kW microturbine is implemented. The influence of gas mass flow rate, gas inlet temperature and air inlet pressure on heat transfer and pressure drop performance is investigated by measuring the temperature and pressure in the inlet and outlet, it is found that the fluid distribution is uniform in a CW primary surface recuperator, the heat transfer effectiveness is improved and the air and gas pressure drops are decreased in different degrees. The correlations of Nusselt numbers and friction factors vs. Reynolds numbers are obtained, the result can be referenced for the design and manufacture of the CW primary surface recuperators.

关 键 词：CW原表面 回热器 试验研究 

分 类 号：TK124[动力工程及工程热物理—工程热物理]