不同加压时间对玻璃离子水门汀粘接强度的影响  

Effect of different pressure time on bond strength of glass ionomer cement

作　　者：刘华英[1,2] 王雪[1] 张磊[1] 

机构地区：[1]青岛大学医学院附属医院口腔修复科,山东省青岛市266003 [2]山东省莱阳卫生学校五官教研室,山东省莱阳市265200

出　　处：《中国组织工程研究与临床康复》2009年第47期9299-9301,共3页Journal of Clinical Rehabilitative Tissue Engineering Research

摘　　要：目的:测定两种玻璃离子水门汀不同加压时间的即刻粘接强度。方法:对70颗离体牙进行牙体预备,暴露牙本质,随机分为2组:KetacTM Cem Easymix玻璃离子水门汀组(3M组)、TOKUSO玻璃离子水门汀组(TOKUSO组);每组根据加压时间不同再分为7个小组,应用玻璃离子水门汀将钴铬合金铸件与牙本质粘接后分别加压5,10,15,20,25,30,35min,测定即刻拉伸强度值。结果:两种玻璃离子水门汀对于钴铬合金与牙本质在加压不同时间后的即刻粘接强度比较差异均有显著性意义(P<0.01),均在加压25min后测得的即刻粘接强度最大。3M加压25min组比TOKUSO加压25min组粘接强度大,但是二者之间差异无显著性意义。结论:KetacTMCemEasymix玻璃离子水门汀、TOKUSO玻璃离子水门汀临床应用时均应加压至25min,以获得最大粘接强度。OBJECTIVE： To survey the immediate bond strength of the two glass ionomer cements with different pressure times. METHODS： Totally 70 teeth were prepared to expose the dentin, and then divided into the KetacTM Cem Easymix GIC glass ionomer cement group （3M group）, and the TOKUSO glass ionomer cement （TOKUSO group）. Each group was divided into 7 subgroups according to pressure times. The immediate tensile strengths of all specimens were measured after pressed for 5, 10, 15, 20, 25, 30 and 35 minutes. RESULTS： The immediate bond strengths of the two glass ionomer cements with different pressure time showed obviously significant differences （P 〈 0.01）, which exhibited the greatest immediate bond strengths at 25 minutes after pressure. The bond strength of 25 minutes subgroup of 3M was higher than that of TOKUSO group, but the difference had no significance. CONCLUSION： Both Ketac TM Cem Easymix and the TOKUSO glass ionomer cement can harvest the maximum bond strength after 25 minutes pressure.

关 键 词：加压时间 玻璃离子水门汀 粘接强度 

分 类 号：R318[医药卫生—生物医学工程]