利用旋转多圆柱导体覆冰质量预测湿增长过程覆冰参数  

Prediction of Wet Growth Icing Parameters by Icing Quantity of Rotating Multi-cylindrical Conductors

作　　者：蒋兴良[1] 申强[1] 舒立春[1] 张志劲[1] 胡建林[1] 胡琴[1] 

机构地区：[1]重庆大学输配电装备及系统安全与新技术国家重点实验室,重庆400044

出　　处：《高电压技术》2009年第12期3071-3076,共6页High Voltage Engineering

基　　金：国家重点基础研究发展计划(973计划)(2009CB724501);国家"十一五"科技支撑计划(2006BAA02A19)~~

摘　　要：针对目前覆冰环境参数测量的难题,根据现有的一些覆冰模型,建立了新的覆冰预测模型,分析了水滴的两个参数(液态水含量(LWC)和中值体积直径(MVD))和风速对不同直径圆柱体覆冰质量和覆冰厚度的影响,根据上述三参数对不同直径圆柱体覆冰质量之间的特性关系,采用数学拟合逼近方法,利用MATLAB编制了基于旋转多圆柱形导体覆冰质量的三参数分析程序,在人工气候室里完成覆冰试验验证,并采用激光粒度仪和风速仪测试对比验证。结果表明,基于旋转多圆柱形导体对水滴参数和风速测量计算是可行的,提出的数学拟合逼近计算方法正确,编制的参数分析程序合理,收敛性比较好,可以在恶劣的覆冰环境下实现对水滴参数和风速的快速测量。Aiming at the problem of the icing environmental parameters measurement, we established an icing predicted model on the basis of the present models, and analyzed the icing mass characteristic impingement of three icing parameters, two droplets parameters （liquid water content （LWC） and median volume diameter （MVD））, and air speed. A MATLAB analysis program of three parameters was programmed by the mathematical fitting approximation method. Icing experiment was done in the artificial climate chamber. And the calculated results were compared with the testing results by laser particle analyzer apparatus and the air speed measurement apparatus. The results show that the three-parameter analysis method based on these rotating multi-cylindrical conductors is feasible, the mathematical fitting approximation calculation method is correct, the parameters analysis program is rational with better convergence. These methods can be used for rapid measurement in the bad icing condition.

关 键 词：覆冰 旋转多圆柱体 液态水含量(LWC) 中值体积直径(MVD) 风速 MATLAB 

分 类 号：TM75[电气工程—电力系统及自动化]