检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]长沙理工大学化学与生物工程学院,湖南长沙410004
出 处:《塑料》2009年第6期23-25,共3页Plastics
基 金:长沙理工大学校基金资助项目
摘 要:研究成核剂二-(3,4-二甲基苄叉)山梨醇(DMDBS)对等规聚丙烯力学性能、光学性能和结晶行为的影响。结果表明:DMDBS可以大幅度提高聚丙烯的力学性能、光学性能和结晶峰温度,具有很好的成核性能。当成核剂DMDBS添加浓度为0.2%时,与空白聚丙烯相比,成核聚丙烯的拉伸强度和弯曲模量可分别提高7.46%和11.96%,雾度可降低52.32%,结晶峰温度T_可从119℃左右提高到130℃左右。同时,DMDBS的加入可大幅度降低聚丙烯的球晶尺寸。Effects of 1,3-0-2,4-bis ( 3,4-dimethylbenzylidene ) sorbitol ( DMDBS ) on mechanical properties, optical properties and crystallization behaviors of isotactic polypropylene (iPP) were studied. The results showed that addition of DMDBS could increase the mechanical properties,optical properties and crystallization peak temperature of iPP greatly. When the addition concentration of DMDBS was 0. 2 % , compared to those of virgin iPP, tensile strength and flexural modulus of nucleated iPP could be increased by 7.46 % and 11.96 % , respectively, haze value could be decreased by 52.32 % and crystallization peak temperature( TC) could be increased from 119℃ to 130℃. At the same time, the addition of DMDBS could decrease spherulite size of iPP greatly.
关 键 词:成核效应 聚丙烯 二-(3 4-二甲基苄叉)山梨醇(DMDBS) 成核剂 结晶
分 类 号:TQ325.14[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.90