FeCuNbSiB非晶薄带磁感应效应研究  

Study on Magnetic Induction Effect of FeCuNbSiB Amorphous Alloy Ribbons

作　　者：蒋达国[1] 钟鸣 李水芳[3] 李源[3] 

机构地区：[1]井冈山大学数理学院,江西吉安343009 [2]九江市教学研究室,江西九江332000 [3]井冈山大学工学院,江西吉安343009

出　　处：《热加工工艺》2009年第22期1-3,6,共4页Hot Working Technology

基　　金：国家自然科学基金资助项目(10847138);江西省科技支撑计划项目(2009-1)

摘　　要：研究了频率为40kHz时,线圈匝数、薄带长度和励磁电压幅值对经300℃×1h退火处理Fe73.5Cu1Nb3Si13.5B9非晶薄带的磁感应效应及磁感应效应变化幅度的影响。结果表明:磁感应效应随着线圈匝数的增多、薄带的加长以及励磁电压幅值的增大而增强。磁感应效应变化幅度随着励磁电压幅值的增大而增大,随着线圈匝数的增多和薄带的加长呈现出先增大后减小的趋势。At 40 kHz and via 300℃×1 h annealing treatment, the influences of winding＇ s circle number, ribbon length and exciting voltage on the magnetic induction effect and the rangeability of magnetic induction effect of Fe.sCulNb3Si13.5B9 amorphous alloy ribbons were studied. The results show that the magnetic induction effect increases with the increase of winding＇s circle number, ribbon length and exciting voltage value. The rangeability of magnetic induction effect increases with the increase of exciting voltage, it means that, with the increase of winding＇ s circle number and ribbon length, the magnetic induction effect increases first and then decreases.

关 键 词：非晶薄带 磁感应效应 线圈匝数 薄带长度 励磁电压幅值 

分 类 号：TG139.8[一般工业技术—材料科学与工程]