壳聚糖/Ⅰ型胶原复合支架材料的制备及其性能的研究  

A study on preparation of novel chitosan/collagen type Ⅰ scaffolds and their properties

作　　者：龚忠诚[1,2] 龙星[2] 魏丽丽[2] 吴杨[2] 刘慧[1] 凌彬[1] 林兆全[1] 

机构地区：[1]新疆医科大学第一附属医院口腔颌面外科,新疆乌鲁木齐830011 [2]武汉大学口腔医学院口腔生物医学工程教育部重点实验室,湖北武汉430079

出　　处：《新疆医科大学学报》2009年第12期1670-1673,共4页Journal of Xinjiang Medical University

基　　金：新疆医科大学第一附属医院青年基金(2009-QN-8)

摘　　要：目的:探讨壳聚糖/I型胶原复合物作为软骨组织工程支架材料的物理性能和生物学特性。方法:将壳聚糖溶液与I型胶原溶液混合,梯度冷冻后通过冷冻干燥法制备成复合支架。以纯壳聚糖支架材料作为对照。扫描电镜检测支架材料的形貌,检测支架材料的孔径、孔隙率和吸水率。酶消化法培养滑膜细胞,将第3代滑膜细胞接种于支架材料中,检测滑膜细胞在支架材料中的粘附情况,并通过噻唑蓝(MTT)法检测支架材料对滑膜细胞增殖的影响。结果:制备的支架材料呈孔隙分布均匀的海绵状。支架材料的平均孔径为(119.32±38.67)μm,孔隙率为(91.40±1.41)%,吸水率为(69.10±5.61)水g/支架干重g。滑膜细胞在壳聚糖/Ⅰ型胶原支架材料中的粘附率为98.73%,并且该支架材料对滑膜细胞的增殖具有明显促进作用。结论:壳聚糖/Ⅰ型胶原支架材料可作为细胞载体应用于软骨组织工程。Objective： To investigate the characteristics of chitosan/collagen type Ⅰ （CS/COL-Ⅰ ）copolymer as a scaffold for cartilage tissue engineering. Methods： CS/COL-Ⅰ copolymers were synthesized through the method of freeze-drying. The morphological characteristics were examined by means of scanning electron microscope; The pore size and porosity as well as water-binding capacity were evaluated. Passage 3 synovial cells were cultured onto the CS/COL- Ⅰ scaffolds to explore the cell attachment capacity and the proliferation of synovial cells on the scaffolds. Results： The synthesized scaffolds exhibited interconnected porous copolymer with pore size of （119.32±38.67） μm, porosity of （91.4±1.41）%, and water-binding capacity of （69.1±5.61） g （water）/g （dry scaffold）. After passage 3 synovial cells being cul- tured onto CS/COL-Ⅰ scaffolds, the cell attachment capacity was evaluated as 98.73%, and the proliferation of synovial cells on the scaffolds was increased. Conclusion： It is suggested that the synthesized CS/ COL- Ⅰ copolymers could be served as a candidate scaffold for cartilage tissue engineering.

关 键 词：壳聚糖 Ⅰ型胶原 软骨 支架 

分 类 号：Q66[生物学—生物物理学]