烧结温度对蓝色长余辉材料Sr_2Al_6O_(11):Eu^(2+),Dy^(3+)发光性能的影响  

Effects of Sintering Temperature on Luminescence Properties ofBlue Long Afterglow Phosphors Sr_2Al_6O_(11):Eu^(2+),Dy^(3+)

作　　者：薛红伟[1] 崔彩娥[1] 黄平[1] 郝虎在[1] 

机构地区：[1]太原理工大学理学院,太原030024

出　　处：《人工晶体学报》2009年第6期1384-1387,1393,共5页Journal of Synthetic Crystals

基　　金：山西省科技攻关项目(No.2007031141);山西省自然科学基金项目资助(No.2007011061);山西省高等学校科技项目(No.20080012)

摘　　要：采用传统的高温固相法合成了蓝色长余辉发光材料Sr2Al6O11∶Eu2+,Dy3+,系统研究了烧结温度对Eu2+和Dy3+共掺杂蓝色铝酸锶长余辉材料物相及发光性能的影响。用X射线衍射仪对所合成的材料进行物相分析,用荧光分光光度计记录了样品的激发光谱和发射光谱,用亮度计记录其余辉衰减曲线。结果表明:随着烧结温度从1100℃升高到1300℃,材料的物相由富锶相逐渐向富铝相转变,其中1200℃条件下合成的样品主相为Sr2Al6O11;发射光谱首先发生蓝移,随后又发生红移,其中1200℃条件下合成的样品发射光谱峰值波长最短(468 nm);主相为Sr2Al6O11的蓝色铝酸锶长余辉材料的余辉时间(≥1 mcd/m2)可达240 min以上。Blue-emitting long-lasting phosphors Sr2Al6O11： Eu^2＋, Dy^3＋ were synthesized by conventional solid state reaction method. The effects of sintefing temperature on the phase-formation and the luminescent properties of the Eu^2＋ and Dy^3＋ co-doped blue strontium aluminates were investigated. Phase identification was carried out by X-ray powder diffraction analysis. Excitation and emission spectra were recorded using a luminescence spectrometer, and afterglow curves were measured by a photometer. The results revealed that with the calcining temperature rising from 1100℃ to 1300℃ gradually, the aluminate rich in strontium changed to the aluminate rich in aluminum while emission band shifted to the shorter wavelength side, and then to the longer wavelength side. The phosphor with a main phase Sr2A16011 and an emission peak at shortest wavelength of 468 nm was synthesized with a calcining temperature of 1200℃. The decay time （ ≥1 mcd/m^2） of the phosphor whose main phase was Sr2Al6O11 reached 240 min.

关 键 词：铝酸锶 固相法 烧结温度 

分 类 号：O614[理学—无机化学]