42CrMo4钢轴类件控时淬火冷却工艺的设计  

Design of Timed Quenching Process for 42CrMo4 Steel Shaft

作　　者：关晓燕[1] 周澍[2] 陈乃录[2] 

机构地区：[1]黑龙江八一农垦大学文理学院,黑龙江大庆163319 [2]上海交通大学材料科学与工程学院,上海200240

出　　处：《热加工工艺》2009年第24期164-166,102,共4页Hot Working Technology

摘　　要：为解决大尺寸合金钢件油淬后力学性能达不到要求、水淬易开裂的问题,介绍了一种以水和空气作为淬火介质的预冷循环控时淬火冷却方法。针对准210mm的42CrMo4钢轴类件,利用数值模拟方法设计淬火冷却工艺,并进行了实际件的淬火冷却试验。通过计算结果和实测数据的对比分析表明,采用预冷循环控时淬火冷却方法可以在避免淬火开裂的同时在一定范围内调整其力学性能。For solving the problems that the mechanical properties of alloy steels are lower than requirement after quenched in oil and tempered and quenching cracks easily appeared after quenched in water, a method called alternately timed quenching （ATQ） which takes water and air in turn as the quenching media was proposed. During the quenching of 42CrMo4 steel shaft with a diameter 210 mm, ATQ processes were designed with the aid of computer simulation and then corresponding physical experiments were carried out consequently. The results show that the proposed technology can significantly reduce the surface cracking tendency and improve the mechanical properties.

关 键 词：计算机模拟 淬火 开裂 控时淬火 力学性能 

分 类 号：TG156.3[金属学及工艺—热处理] TP391[金属学及工艺—金属学]