合肥光源波荡器光束线光位置检测器  

Photon Beam Position Monitor for Hefei Light Source Undulator Beamline

作　　者：孙葆根[1] 顾黎明[1] 马天骥[1] 卢平[1] 王季刚[1] 唐雷雷[1] 

机构地区：[1]中国科学技术大学核科学技术学院国家同步辐射实验室,安徽合肥230029

出　　处：《原子能科学技术》2009年第B12期172-176,共5页Atomic Energy Science and Technology

基　　金：国家自然科学基金资助项目(10675118;10875117)

摘　　要：研制了合肥光源波荡器光束线刀片型光位置检测器。在不同波荡器狭缝下,对刀片电极的光电流进行了测量,并对其进行了标定,得到了灵敏度和同步光中心位置,如在狭缝为40 mm时,水平方向和垂直方向的灵敏度分别为0.0015 mm-1和0.8522 mm-1。为了改进刀片型光位置检测器,给出了一种交错刀片型光位置检测器的设计,该检测器将狭缝为40 mm时的水平灵敏度提高到0.551 mm-1。This paper describes the development of blade-type photon beam position monitor in undulator beamline at HLS （Hefei Light Source） and the photon beam position measurement system. For different gaps of undulator, the calibration of the monitor was carried out. The sensitivity and center positions of photon beam position monitor were measured for different gaps, for example, the horizontal sensitivity and vertical sensitivity are 0. 001 5 mm land 0. 852 2 mm l at 40 mm gap. In order to improve the photon beam position monitor, a staggered blade-type photon beam position monitor was introduced. At 40 mm gap, the horizontal sensitivity of the new monitor is 0. 551 mm^-1.

关 键 词：同步光 光位置检测器 灵敏度 中心位置 交错刀片型 

分 类 号：TL594[核科学技术—核技术及应用] TL506