一种合成对异丙基苯酚的新方法研究  

A New Synthesis Method for p-Isopropylphenol

作　　者：湛雪辉[1] 曹芬[1] 姜红宇[2] 李飞[1] 周随安[1] 

机构地区：[1]长沙理工大学化学与环境工程学院,湖南长沙410076 [2]湖南科技学院化学与生物系,湖南永州425100

出　　处：《湖南大学学报（自然科学版）》2010年第1期67-70,共4页Journal of Hunan University:Natural Sciences

基　　金：国家自然科学基金资助项目(20976017);湖南省科技攻关资助项目(2007SK4029;2008CK3044)

摘　　要：采用5%Pd/C作为转移氢催化剂,4-异丙基环己烯酮为氢给予剂,工业双戊烯为氢接受剂和溶剂进行反应,合成了对异丙基苯酚.考察了催化剂用量、反应时间和反应温度对反应的影响,确定了合成对异丙基苯酚的最佳反应条件:原料与5%Pd/C的配比为10∶0.7(质量比)、反应时间为30 min,在174℃回流温度下,对异丙基苯酚的产率可达87%.对催化剂的重复使用次数进行了考察,使用5次后催化剂活性是原来的89.7%.p Isopropylphenol was synthesized by catalytic transfer dehydrogenation with 5% Pd/C using 4-isopropylcyelohexenone as the material and the hydrogen offer, industrial dipentene as the hydrogen acceptor and the solvent. The reactions were carried out directly under reflux condition. The effects of an amount of 5%Pd/C,the reaction time and reaction temperature were investigated. The optimal conditions of the synthesis were determined as follows：the mass ratio of 5%Pd/C to the material was 10 ： 0.7, the reaction time was 30 min at reflux temperature. The yield of p-isopropylphenol was up to 87% under the above conditions. The times of the repeated use of the catalyst were investigated. The activeness of the catalyst after being used for 5 times was 89.7%.

关 键 词：对异丙基苯酚 催化转移脱氢 Pd/C试剂 工业双戊烯 

分 类 号：O625.11[理学—有机化学]