检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安建筑科技大学土木工程学院,西安710055 [2]宁夏大学土木与水利工程学院,宁夏银川750021 [3]广州大学工程抗震研究中心,广州510405
出 处:《振动与冲击》2010年第1期207-213,共7页Journal of Vibration and Shock
基 金:国家自然科学基金重点项目(90815027)
摘 要:通过按建筑结构抗震规范的规定构造加速度反应谱作为随机激励,构筑了我国四川地区典型钢筋混凝土结构单层厂房有限元模型,采用拟动力时程方法对结构的抗震性能进行了分析计算,得到了钢筋混凝土结构厂房的易损性曲线;同时,针对原型结构在地震作用下柱基础容易发生屈服破坏的情况,对原型结构基础采取了铅芯阻尼橡胶支座隔震加固措施,并对加固后的厂房结构进行了计算分析并得到了修正易损性曲线,通过对比得到结构在地基不失稳的前提下,在小震时发生中度以上损伤的概率非常小,在大震时随着承重结构进入塑性屈服发生中度以上的损伤概率开始逐渐变大,而且厂房结构纵横两个方向的易损性概率在大震时有差异,采取隔震加固措施后结构损伤概率明显减小。During Sichuan earthquake,a lot of industrial buildings were collapsed,at the same time the others were injured at several levels.Now,how to evaluate reliability and fragility of industrial buildings and find reasonable designing these reinforced concrete buildings for aseismic strengthening are urgent.A finite element analytical model was built considering building history,material difference and design configuration of industrial buildings in Sichuan.Mean-while, an uniform response spectrum of acceleration was set up as an input seismic excitation according to China Seismic Code,lead-rubber bearings were used on the base of the original buildings as a building strengthening measure,fragility curves of two kinds of buildings were also obtained after careful analysis.Inter-storey ratio was decreased about 1/3 after using seismic isolation measures.In the end,some valuable conclusions were drawn.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.217.164.190