真空导入工艺用不饱和聚酯树脂的研制  

Research of Unsaturated Polyester Resin for Vacuum Infusion Process

作　　者：曹鑫[1] 

机构地区：[1]常州天马集团有限公司,江苏常州213000

出　　处：《纤维复合材料》2009年第4期12-13,共2页Fiber Composites

摘　　要：本文研究合成的不饱和聚酯树脂具有较低的粘度和较好的固化特性,粘度控制在0.21Pa.s左右,非常适用于真空导入工艺,该树脂采用真空导入工艺成型的玻璃钢制品各项性能都非常优越,有些性能指标几乎是通用树脂手糊成型性能的两倍左右。The resin introduced by this paper has lower viscosity and better hardening characteristics.The viscosity about 0.21Pa·s is suitable to VIP.The properties of FRP made by VIP based on this resin are very good.Some date are double that of FRP made by hand lay-up moulding based on general purpose UP resin.

关 键 词：真空导入工艺(VIP) 不饱和聚酯树脂 液体树脂灌注成型(LRI) 

分 类 号：TQ323.41[化学工程—合成树脂塑料工业]