检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]长沙理工大学,湖南长沙410114 [2]宁乡县交通局,湖南长沙410600
出 处:《工程力学》2010年第1期33-40,共8页Engineering Mechanics
基 金:国家自然科学基金项目(50778026;50808026);交通部应用基础研究项目(2006319825090);湖南省教育科研项目(06B008)
摘 要:结合沥青路面压实过程,利用MTS材料试验系统对松散热态沥青混合料进行压实试验,并用PT100温度记录仪采集温度变化。获得不同混合料的压实力学响应曲线和温度变化规律,分析了混合料的压实行为;建立一种考虑沥青混合料有效应力的粘弹塑性本构方程来反映其流变特性,并确定各荷载循环和温度下沥青混合料的粘弹塑性模型参数。结果表明:压实过程的松散热态沥青混合料具有明显的粘弹塑性特性,压实试验全面地反映了混合料的变形特性,粘弹塑性模型参数很好地揭示了混合料压实过程的力学特性;在一定温度范围和压实作用下混合料才能获得有效压实,为热态沥青混合料压实流变性能和施工工艺的研究提供了理论基础和试验方法。Based on the asphalt pavement compaction process, the loose hot asphalt mixture was compacted by the MTS(Material Testing System), temperature was measured by PT100 temperature recorder. The compaction mechanical response curve and temperature decreasing laws of the mixture are obtained and its mechanical behavior is analyzed. A new viscoelastoplastic constitutive equation based on the effective stress is established to reflect the rheological characteristic of the asphalt mixture, the viseoelastoplastic parameters and temperature are determined and the compaction behavior is analyzed under each load cyclic. The results indicate that, the loose hot asphalt mixture has distinctly viscoelastoplasticity; the compaction test reflects roundly its deformation characteristic; mechanical characteristic is showed well by viscoelastoplasticity model parameter during compaction process. The mixture can get effective compaction in a certain temperature range and compaction power, the theory foundation and test way are provided for the research on compact rheological performance and construction techniques of the hot asphalt mixture.
关 键 词:道路工程 热态沥青混合料 压实力学响应 粘弹塑性 模型参数 非线性回归
分 类 号:U416[交通运输工程—道路与铁道工程] U414.75
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.30