氢对Ti-6Al-4V合金微观组织的影响(英文)  

Effect of Hydrogen on Microstructure of Ti-6Al-4V Alloys

作　　者：李淼泉[1] 张伟福[1] 朱堂葵[1] 侯宏亮[2] 李志强[2] 

机构地区：[1]西北工业大学,陕西西安710072 [2]北京航空制造工程研究所,北京100024

出　　处：《稀有金属材料与工程》2010年第1期1-5,共5页Rare Metal Materials and Engineering

基　　金：Supported by "973" Project;National Natural Science Foundation of China (50371068);NPU-FFR-006

摘　　要：采用累计流量法对供应态Ti-6Al-4V合金进行了固态置氢,运用OM、XRD、TEM分析等方法研究了Ti-6Al-4V合金固态置氢后的微观组织状态及演变过程。结果表明:供应态Ti-6Al-4V合金的置氢量低于0.30%(质量分数,下同)时,置氢使得Ti-6Al-4V合金中的α相减少、β相增加;置氢量达到0.30%时,置氢Ti-6Al-4V合金中有δ氢化物(TiH2相)形成;β-Ti(H)共析转变生成α-Ti和δ氢化物时主要以切变方式进行;置氢Ti-6Al-4V合金的相变温度最多下降了180°C,与Ti-6Al-4V合金在置氢过程中的相体积比变化和共析转变有密切关系。Hydrogenation of Ti-6Al-4V titanium alloys was carried out in a special furnace through the accumulated flux method, and OM, XRD and TEM techniques were used to investigate the microstructure evolution of the hydrogenated Ti-6AI-4V titanium alloy. The hydrogenation of the Ti-6Al-4V titanium alloy with the hydrogen content of 0.30 wt% makes the a phase fraction decrease compared with that of the as-received Ti-6Al-4V titanium alloy, but it makes the/~ phase fraction increase. The d hydride （Till2 phase） occurs in the hydrogenated Ti-6Al-4V titanium alloy when the hydrogen content is more than 0.3 wt%. The shear deformation is main pattern in the transformation processes from β-Ti（H） phase to α-Ti phase and δ hydride （TiH2 phase）. The phase transformation temperature of the hydrogenated Ti-6Al-4Vtitanium alloy decreases by 180℃ compared with that of the as-received Ti-6Al-4V titanium alloy, and it is related to the phase fraction and phase transformation.

关 键 词：TI-6AL-4V合金 置氢 ℃氢化物 相变温度 

分 类 号：TG146.2[一般工业技术—材料科学与工程]