负载型MoO_3/SiO_2催化合成乙酸乙酯  

Supported MoO_3/SiO_2 Catalytic Synthesis of Ethyl Acetate

作　　者：邢华琼[1] 孙雅玲[1] 邹丹[1] 杜长海[1] 

机构地区：[1]长春工业大学化工学院,吉林长春130012

出　　处：《广东化工》2010年第2期21-22,共2页Guangdong Chemical Industry

基　　金：吉林省科技厅自然科学基金(20040570)资助

摘　　要：采用等体积浸渍法制备了MoO3/SiO2负载型催化剂,并用于催化乙醇和乙酸的酯化反应。考察了催化剂的制备条件及反应条件对醋酸转化率的影响。结果表明,催化剂适宜的制备条件为焙烧温度450℃,焙烧时间4 h,MoO3负载量为20%;适宜的反应条件为反应时间3 h、原料醇酸比为1.4︰1、催化剂用量为醋酸质量的1.9%,醋酸的转化率为79%,乙酸乙酯的选择性为100%,催化剂可重复使用。MoO3/SiO2 catalyst was prepared by equivalent-volumetic impregnation method, and was used as catalyst to synthesize ethyl acetate. The optimum preparation and synthesis conditions were investigated. The results showed that calcination temperature was 450 ℃, calcination time was 4 h, MoO3 loading was 20 %, molar ratio of ethanol and acetic acid was 1.4：1, reaction time was 3 h, catalyst amount was 1.9 % of acetic acid. The conversion rate of acetic acid could reach 79 %, the selectivity of ethyl acetate was 100 %, The catalyst can be reused directly for 5 times.

关 键 词：MoO3/SiO2 乙酸乙酯 催化合成 

分 类 号：TQ[化学工程]