全钢子午胎H8/C6压出联动生产线前后端的改进  

Pre and post end improvement of all-steel radial tire H8/C6 extrusion linkage production line

作　　者：朱彩惠 裴注茗 

出　　处：《中国橡胶》2010年第2期39-40,共2页China Rubber

摘　　要：笔者所在公司全钢H8／C6双复合压出生产线主要用于生产全钢载重胎胎面、胎侧，是全钢胎制造的关键设备。其联动生产线主要包括接取输送带、收缩辊道、打印装置、连续称量装置等。胎面压出后，需经过牵引、收缩、预称重、打印、划线、贴PE纸、冷却、裁断、干燥、称量和接取等一系列工序。为使连续压出的胎面宽度及厚度均匀，In view of early importing of extrusion production line, it hasn＇t been unable to meet the rising demands of corporate capacity. Coupled with rapid replacement of electric control technology, it is necessary to modify the existing linkage lines to improve the quality of tire parts and meet the requirement of processing technology better. In this article, according to improve the dewatering segment after adjoining and cutting the extruder exit part, it reaches the goal of advancing production capacity and automation level.

关 键 词：全钢子午胎 压出生产线 联动生产线 打印装置 称量装置 胎面 载重胎 输送带 

分 类 号：TQ336.1[化学工程—橡胶工业] TQ330.44