大功率光纤连接器插损测试技术研究  

Research on the inserting loss of fiber connector with high power

作　　者：李华强 黄媛媛 李太华 宋贺伦[2] 

机构地区：[1]北京航天机电技术研究所,北京10070 [2]中科院苏州纳米所,江苏苏州215125

出　　处：《光通信技术》2010年第2期46-48,共3页Optical Communication Technology

摘　　要：插入损耗是表征光纤连接器性能的重要光学参数,随着光纤在功率传输领域的应用,大功率(>1mW)光纤连接器的插损测量成为目前急待解决的技术.在搭建了测试平台的基础上,采用直接测量法对不同传输功率下光纤连接器的插入损耗进行了测量,试验结果表明插入损耗是随传输能量不断变化的,并存在一个功率值让其达到最小值,文中所用连接器的拐点在0.1W左右。Inserting loss is one of the important characters of the fiber connector, as the development in the field of energy, the inserting loss of the fiber connector with high power has become the problem that is anxious to be resolved. In this paper, through constructing a test-plane, the inserting loss with different power is obtained, the results show that the inserting loss is different with the incident power, and in the experiment, it reaches the minimum while the power is about 0. 1W.

关 键 词：光纤连接器 测试技术 大功率 插损 直接测量法 插入损耗 功率传输 光学参数 

分 类 号：TN253[电子电信—物理电子学] TD528[矿业工程—矿山机电]