轴流泵内部流场空化问题研究  

Research on Cavitation in a Axial-Flow Pump

作　　者：袁丹青[1] 陈向阳[1] 丛小青[1] 王冠军[1] 白滨[1] 

机构地区：[1]江苏大学能源与动力工程学院,江苏镇江212013

出　　处：《中国农村水利水电》2010年第1期138-140,143,共4页China Rural Water and Hydropower

基　　金：国家自然科学基金资助项目（50776040）.

摘　　要：利用Navier-Stokes方程、RNG湍流模型和欧拉一欧拉均相流模型，对轴流泵偏大流量工况下的空化流动进行了数值模拟。通过对计算结果进行分析，阐述了轴流泵各段中空泡的主要来源，有效预测了发生空化、空蚀的主要部件和区域，并揭示了叶片背面压力带和空化带的关系。对比计算扬程和效率确定了空化的发展阶段，对于保障轴流泵稳定运行有一定指导意义。Numerical simulation of cavitation in axial-flow pumps under large-flow conditions is conducted by calculations, EulerianEulerian homogeneous model and Navier-Stokes equation with RNG turbulence model in this paper. An analysis of simulation results explains the main sources of bubbles in flow of axial-flow pumps and predicts the assembly and region where cavitation and cavitation erosion has happened and brings out the relationship between pressure and cavitation areas of the back of impeller. Comparing the head and efficiency confirms the stage of cavitation and it is good for the operation of axial-flow pump running.

关 键 词：轴流泵 空化 空蚀 数值模拟 

分 类 号：TH38[机械工程—机械制造及自动化]