检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张文元[1] 郑朝荣[1] 张耀春[1] 武岳[1] 孙雨宋[2]
机构地区:[1]哈尔滨工业大学土木工程学院,哈尔滨150090 [2]东北电力设计院,长春130021
出 处:《建筑结构》2010年第2期97-99,69,共4页Building Structure
摘 要:采用SAP2000软件建立了某景观烟囱的结构分析模型,输入风荷载时程进行风振响应分析。考虑了烟囱复杂外形和不规则质量分布,利用频域方法计算了烟囱第1阶振型的风振位移响应,并与时域方法的结果进行对比,二者吻合较好。分别采用阵风荷载因子法和惯性风荷载法计算了烟囱结构不同高度处的风振系数,并将基于该两种风振系数的等效静力风荷载分别作用在烟囱结构上,计算其顺风向位移响应并与精确值进行比较,结果表明其位移分布均符合真实响应。因此虽然上述两种方法得到的风振系数沿高度分布差别较大,但均能实现烟囱的风振位移等效,均是合理的。为工程应用方便,采用基于阵风荷载因子法的风振系数供结构设计使用。Based on the finite element model of a landscape chimney by SAP2000 and wind load history, the dynamic responses of the chimney were analyzed using time domain method. Also, wind-induced displacements of chimney's first mode were calculated using the frequency domain method, in which the uneven distribution of width and mass was taken into account, and the results are close to the responses from time domain analysis. Both the gust loading factor method and the inertial wind load method were selected to calculate the gust response factors along the height of chimney, and distribution of wind-induced displacements by the equivalent static wind loads based on the above methods agrees well with the exact displacements. So the two methods can both acquire reasonable gust response factors and realize the displacements equivalence of chimney, though distributions of the gust response factors have great difference. Lastly, the gust response factors calculated from the gust loading factor method are recommended for reference of practical design, as for convenience of application.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15