MBR工艺处理城镇污水处理厂污泥水中试研究  

Pilot test on MBR process for sludge treatment in municipal wastewater treatment plant

作　　者：刘范嘉[1] 聂英进[1] 张晓丹[1] 陈曦[1] 常华[1] 

机构地区：[1]天津创业环保集团股份有限公司,天津300381

出　　处：《给水排水》2010年第2期42-45,共4页Water & Wastewater Engineering

基　　金：天津市建委科技项目(2007-04);"国家水体污染控制与治理"科技重大专项(2009ZX07314-002)

摘　　要：将平板膜组件与传统脱氮除磷工艺相结合,构建了膜生物反应器强化生物脱氮除磷中试系统,并用于处理城镇污水处理厂的污泥系统废水。结果表明,出水CODCr、BOD5、NH3—N、TN和TP的平均浓度分别为70.8 mg/L、8.7 mg/L、15.1 mg/L、29.7 mg/L和0.38 mg/L,达到或接近了《城镇污水处理厂污染物排放标准》(GB 18918—2002)的一级标准。By combining the plate membrane bioreactor with the conventional biological nitrogen and phosphorus removal process, a pilot test system for enhaneing biological nitrogen and phosphorus removal of membrane bioreactor （MBR） was constructed and used to treat sludge water from municipal wastewater treatment plant. The results show that the effluent average concentrations of CODCr, BODs, NH3-N, TN and TP are 70. 8 mg/L, 8. 7mg/L, 15. 1mg/L, 29. 7 mg/L and 0. 38 mg/L respectively. Therefore, first stage criteria specified in the ＂Discharge standard of pollutants for municipal wastewater treatment plant （GB 18918 2002）＂ is achieved or approached.

关 键 词：城镇污水处理厂 污泥水 膜生物反应器 平板膜组件 脱氮除磷 

分 类 号：X505[环境科学与工程—环境工程] X703