鞍钢炼铁总厂360m^2烧结机的节能降耗实践  

Energy-Saving and Consumption-Reducing Practice of the 360m^2 Sinter Machine of Ansteel Iron-Making Plant

作　　者：韩晓东[1] 刘艳辉[2] 

机构地区：[1]鞍钢集团科技质量部 [2]鞍钢股份有限公司炼铁总厂

出　　处：《烧结球团》2010年第1期56-58,共3页Sintering and Pelletizing

摘　　要：鞍钢炼铁总厂360 m2烧结机自投产以来,工序能耗一直居高不下。近几年,通过采取一系列有效措施,包括:提高生石灰配比、厚料层烧结、改进点火器等,使工序能耗逐年下降,到2007年已降至56.20 kg/t,比投产之初的2002年降低了15.35 kgce/t。The process energy consumption has been very high since the 360 m2 sinter machine of Ansteel iron-making plant was put into production. Over the past few years, through a series of measures including increasing quicklime proportion,adopting deep bed sintering and improving the ignitor etc., the process energy consumption was reduced year by year, it has reduced to 56.20 kg/t in 2007, which was 15.35 kgce/t lower than the year 2002 in which sinter machine was put into production.

关 键 词：工序能耗 生石灰配比 厚料层烧结 点火器 

分 类 号：TF3[冶金工程—冶金机械及自动化] X757[环境科学与工程—环境工程]