基于1.06/1.54μm激光的离轴折反式平行光管物镜设计  

Optical Design of an Off-axis Aspheric Laser Collimator Based on 1.06/1.54 μm

作　　者：马洁 曾宇 

机构地区：[1]武汉产品质量监督检验研究所国家红外及工业电热产品检验中心,湖北武汉430043

出　　处：《红外技术》2010年第2期81-83,共3页Infrared Technology

摘　　要：设计了λ1=1.06μm,λ2=1.54μm,f=1000mm,D=167mm,2ω=0.6°的平行光管物镜,由于系统要求低成本、中心无遮拦且结构简单紧凑,故采用离轴折反射结构形式。初始结构中,主镜采用抛物面反射镜,在其成像光束中加入一个光焦度为零且有空气间隔的同种材料组成的双透镜组,消除了正弦差。同时为了减小补偿透镜组的口径,使它们适当地靠近像面位置。利用ZEMAX优化结果表明传递函数达到衍射极限,完全满足设计要求。This paper describes a method of designing a collimator with 1000 nun focal length, aperture of 167 mm and 0.6°~ field of view used when its primary wavelength is either 1.06 μm or 1.54μm. Choose off-axis catadioptric optical system to satisfy the request of low cost, without obscuration and simple- compact configuration. Primary mirror is an parabolic mirror in the original structure, then add same material made lenses, and the power of the combination is zero, it can help eliminating the offence against of sine condition. And get them close to the image plane properly to reduce the aperture of the double-separate lens. After optimizing the original data, MTF has achieved diffraction limit.

关 键 词：光学设计 平行光管 离轴折反式 激光 

分 类 号：TB96[机械工程—光学工程] TH741[一般工业技术—计量学]