B含量对Al-Zn-Sn系阳极材料组织与性能的影响  

Effect of Boron Content on Microstructure and Properties of Al-Zn-Sn Sacrificial Anode Materials

作　　者：史志红[1] 文九巴[1,2] 马景灵[1] 王国伟[1] 

机构地区：[1]河南科技大学材料科学与工程学院,河南洛阳471003 [2]河南省有色金属材料科学与加工技术重点实验室,河南洛阳471003

出　　处：《热加工工艺》2010年第2期24-26,共3页Hot Working Technology

基　　金：河南省科技创新杰出人才计划(094200510019);河南省自然科学基金资助项目(0922300410132)

摘　　要：在Al-Zn-Sn系阳极材料的基础上添加不同含量的B,研究B对合金组织性能的影响,运用电化学测试、扫描电镜技术,研究合金的组织和电化学性能。结果表明:硼含量主要影响合金的晶粒大小、枝晶形态、第二相的数量和分布,进而影响合金表面溶解均匀性和电流效率;合金在B含量为0.0155%时,即按B、Ti质量比为1∶3.22的比例添加B,可获得良好的电化学性能。In order to investigate the effects of boron content on the microstructure and properties of aluminum alloy, different kinds of aluminum alloys based on Al-Zn-Sn anode materials with different boron content were prepared, and its microstructure and electrochemical properties were analyzed by electrochemical measurement and scanning electron microscopy. The results show that boron content has large influence on the grain size, dendrite morphology, quantity and distribution of the second phase, and further affects the current efficiency and uniformity of the dissolution on the surface of the alloys. The best electrochemical performance of the alloys is obtained when boron content is 0.0155%, which means that the mass ratio of B/Ti is 1∶3.22.

关 键 词：铝合金 牺牲阳极 硼元素 晶粒 

分 类 号：TG147.2[一般工业技术—材料科学与工程]