水平连铸无氧铜带坯工艺条件研究  

Technological Studies on Oxygen-free Copper Strip Prepared by Horizontal Continuous Casting

作　　者：郭明恩[1] 刘瑞 

机构地区：[1]烟台大学机电学院,山东烟台264005 [2]烟台泰达铜材设备有限公司,山东烟台264002

出　　处：《铸造技术》2010年第2期176-178,共3页Foundry Technology

基　　金：山东省自然科学基金(ZR2009FL025)

摘　　要：潜流式水平连续铸造坯锭-高精冷轧工艺生产无氧铜带材的关键工序是熔铸过程,它决定着无氧铜加工材的两个内在质量指标——致密度和氧含量。对铸造工艺来说,若参数匹配不妥,铸坯内会存在晶粒粗大、显微裂纹、缩孔、缩松、偏析等组织缺陷,使致密度降低,这也是冷加工报废的主要原因。通过连铸工艺参数的正交实验,建立了铸坯致密度与主要工艺参数之间的神经网络描述,网络模型与遗传算法结合对工艺参数的组合进行了优化,改善了铸坯的组织质量,提高了铸坯致密度。The strip of Oxygen-free Copper were produced through undercurrent horizontal continuous casting-cold rolling technique. It were found that there were some micro-cracks, internal shrinkage, and inverse-segregation in the strip billet of Oxygen-free Copper, which debase the densities of the strip billet and were the main reasons for rejected castings during cold working. Through the orthogonal experiment on the technical factors in the casting process, the mapping model of artificial neural networks had been established using the data obtained in the experiments. With the help of this model, the optimal casting conditions had been studied by GA optimizations method and real experiments. The results show that the microstructures of castings were improved and densities of the strip billet were enhanced.

关 键 词：无氧铜带坯 水平连铸 工艺参数优化 

分 类 号：TG291[金属学及工艺—铸造]