淬硬钢Cr12高速铣削力实验研究  

Experimental study on high speed milling force of quench steel cr12

作　　者：陆洁[1] 胡忠举[1] 宋一平[1] 曾湘黔[1] 

机构地区：[1]湖南科技大学机电工程学院,湘潭411201

出　　处：《机械设计与制造》2010年第2期170-171,共2页Machinery Design & Manufacture

基　　金：湖南省自然科学基金项目(05JJ30080)

摘　　要：对淬硬钢Cr12进行了高速铣削实验研究,研究了铣削速度、背吃刀量、进给速度对铣削力的影响。研究表明:铣削力随着铣削速度的增加而减小,当铣削速度增加到一定的值后其下降趋势变得平缓;铣削力随背吃刀量的增大而增大,且变化显著;铣削力随进给速度的增加而增加,但增加不大。High speed milling of quench steel Crl2 is researched. The effect of milling speed, milling depth and feed speed on milling force is focused on. The result of researching shows ：the milling force grows as the milling speed increases ,but the milling force grows more slowly when the milling speed increases to a determinate number;the milling force grows observably as milling depth increases;the milling force grows as the feed speed increases,but its influence is less.

关 键 词：高速铣削 淬硬钢 铣削力 切削用量 

分 类 号：TH16[机械工程—机械制造及自动化] TG506[金属学及工艺—金属切削加工及机床]