塑/塑复合用水性复膜胶的研制  

Study on water-based laminating adhesives for plastic/plastic lamination

作　　者：李胜华[1] 姜云刚[1] 冯小平[1] 邓康清[1] 王玲玲[1] 

机构地区：[1]中国航天科技集团四院四十二所,湖北襄樊441003

出　　处：《中国胶粘剂》2010年第2期42-44,共3页China Adhesives

摘　　要：在丙烯酸酯单体中加入一种特殊功能单体(HT),通过种子乳液聚合法制备了一种塑/塑复合用水性丙烯酸酯复膜胶(FM-45)。研究了丙烯酸酯复合功能单体配比对FM-45的剥离强度、乳化体系以及应用性能等影响。结果表明:当复合功能单体中m(丙烯酸)∶m(丙烯酸羟丙酯)∶m(HT)=2∶3∶1、w(复合乳化剂)=0.6%(相对于单体总量而言)时,FM-45的综合性能最佳。With a special functional monomer（HT） as comonomer of acrylate monomers,so an water-based acrylate laminating adhesive（FM-45） for plastic/plastic lamination was prepared by seed-emulsion polymerization.The influences of composite functional monomers ratio for acrylates were investigated on the peeling strength,emulsification system and application properties of FM-45.The results showed that the combination property of FM-45 was best when mass ratio of re（acrylate acid）：m（hydroxylpropyl acrylate）：m（HT） was 2：3：1 ,mass fraction of composite emulsifier was 0.6% in total monomers.

关 键 词：塑/塑复合 水性复膜胶 丙烯酸酯 官能单体 

分 类 号：TQ433.436[化学工程] TQ437.2