星/机双站SAR成像处理技术研究  

Bistatic SAR Imaging for Satellite/Airborne Configuration

作　　者：李建阳[1] 常文革[1] 

机构地区：[1]国防科学技术大学电子科学与工程学院,长沙410073

出　　处：《信号处理》2010年第1期32-37,共6页Journal of Signal Processing

摘　　要：针对发射机为卫星、接收机为载机且飞行航迹平行模式下的双站SAR,本文建立了回波信号的模型,分析了多普勒调频率、多普勒中心、目标位置、距离弯曲等参数的变化;采用单站SAR等效法推导了回波信号二维频谱,并对单站SAR等效法与距离历程泰勒级数展开法所产生的相位误差进行了比较,进而采用Nonlinear Chirp Scaling(NCS)算法进行成像处理。通过插值校正目标沿方位向出现的几何拉伸形变,采用距离频谱搬移校正目标沿距离向的几何偏差。最后,采用仿真数据验证了本文方法的正确性。This paper states the signal Model of bistatic Synthetic Aperture Radar in the satellite/airborne configuration,and then analyzes the properties of the Doppler parameters, target position and Range Cell Migration （RCM）. The two-dimension spectrum is de- duced using the monostatie SAR equivalent,and the phase error is compared between monostatic SAR equivalent and Taylor serial expand. The Nonlinear Chirp Scaling algorithm is used for the imaging of bistatic SAR. An interpolation operation is required to remove the azimuth scaling in the images, and the range offset in the image is removed by shifting the range spectrum. Finally, the algorithm proposed with this paper is validated using simulation experiment.

关 键 词：双站SAR 多普勒调频率 NCS 几何校正 

分 类 号：TN951[电子电信—信号与信息处理] TN958[电子电信—信息与通信工程]