扣件式钢管模板支架静压变形特性的试验研究  

A STUDY ON DEFORMATION CHARACTERISTIC OF COUPLER STEEL TUBE FALSEWORK

作　　者：胡长明[1] 葛召深[1] 王丽芳[1] 沈勤 

机构地区：[1]西安建筑科技大学土木工程学院,西安710055 [2]上海宝冶建设有限公司,上海200941

出　　处：《工业建筑》2010年第2期32-35,共4页Industrial Construction

基　　金：国家自然科学基金资助项目(50978219);财政部国家重点施工新技术研发项目(财企[2006]376号)

摘　　要：通过对5个工况室内试验加载全过程的跟踪监测,以分析整架及其局部立杆的变形特性。研究发现,模板支架具有明显的双向侧移,其中立杆变形曲线以受节点侧移控制的b类为主,扣件式钢管模板支架应该属于具有半刚性节点的有侧移框架。另外,剪刀撑对模板支架扭转及变形的约束较好,施工过程中应特别注意剪刀撑的布置。模板支架的变形特性对于建立架体稳定分析理论具有重要的参考价值。According to the tracking and monitoring of all course loading of specimens under 5 conditions, it is analysed distortion characteristic of integral frame and local vertical bars. The results show that the support have obvious lateral displacement of double direction, the distortion curve of the vertical bar is mainly b kind that is eontroled by nodal displacement, so the coupler steel tube falsework should be a frame with lateral displacement and semi-rigid node. In addition, a bridging has a good restriction on torsion and distortion of the falsework special attention should be given to its disposal in constructing. Distortion characteristic of the falsework bears important referrence value on founding theory of analyzing frame stability.

关 键 词：扣件式钢管模板支架 变形特性 试验 

分 类 号：TU755.2[建筑科学—建筑技术科学]