La_2O_3对NiO/HMCM-56催化剂C_9^+重芳烃加氢脱烷基性能的影响  

Effect of La_2O_3 on Performances of NiO/HMCM-56 Catalyst in Hydrodealkylation of C_9^+ Heavy Aromatics

作　　者：何剑洪[1] 朱学栋[1] 申群兵[1] 潘志英[1] 朱子彬[1] 宋淼[1] 

机构地区：[1]化学工程联合国家重点实验室华东理工大学,上海200237

出　　处：《石油化工》2010年第3期249-255,共7页Petrochemical Technology

基　　金：中国石油天然气股份有限公司科学研究与技术开发项目(W06-04A-01-01A)

摘　　要：采用等体积浸渍法制备了NiO质量分数6%、La2O3添加量不同的La2O3-NiO/HMCM-56催化剂,考察了La2O3添加量和工艺条件对C9+重芳烃加氢脱烷基反应性能的影响,并采用XRD、H2-TPR、NH3-TPD和BET等技术对催化剂的物化性质进行了研究。实验结果表明,添加La2O3可以提高NiO在催化剂上的分散性,改变催化剂的酸性分布与酸量,改善了催化剂的加氢脱烷基性能;在实验范围内,随La2O3添加量的增加,加氢脱烷基反应的深度增加,C9+重芳烃转化率及苯、甲苯和二甲苯(统称BTX)收率增大,但二甲苯的选择性在La2O3添加量(质量分数)为3%时达到最大。采用La2O3添加量为3%的La2O3-NiO/HMCM-56催化剂,在460℃、3.0MPa、重量空速3.62h-1及V(H2)∶V(C9+)=1600的条件下,C+9重芳烃的转化率、BTX收率及BTX选择性分别为75.23%,63.36%,84.23%。Several La203-NiO/HMCM-56 catalysts with 6% （mass fraction ） NiO as main active component and different La2O3 loadings were prepared by the incipient impregnation method. Effects of La2O3 loading and reaction conditions on the catalyst activity in hydrodealkylation of heavy aromatics were investigated. The catalysts were characterized by means of XRD, H2-TPR, NH3-TPD and BET. The results showed that addition of La2O3 heightened nickel species dispersity, changed acidity distribution and acid amount of the catalysts, and improved activities of the catalysts in heavy aromatics hydrodealkylation. Both conversion of C9^＋ heavy aromatics and yield of BTX（benzene,toluene and xylene） rose with increase of La203 loading. But selectivity to xylene was the maximum when La203 loading was 3%. Under the conditions of La2O3-NiO/HMCM-56 with 3% La2O3 as catalyst, 460℃, 3.0 MPa, WHSV of C9 heavy aromatics 3.62 h^-1 and V（H2） ： V（C9 ） 1 600, conversion of C9 heavy aromatics was 75.23%, yield of BTX 63.36% and selectivity to BTX 84.23%.

关 键 词：氧化镧 氧化镍/HMCM-56分子筛催化剂 C+9重芳烃 加氢脱烷基 

分 类 号：TQ426[化学工程]