光纤激光不锈钢薄板切割工艺研究  

Study of Cutting Stainless Steel Sheet with Fiber Laser

作　　者：李晓宇[1] 陈继民[1] 刘富荣[1] 蒋茂华[1] 杨威[1] 

机构地区：[1]北京工业大学激光工程研究院,北京100124

出　　处：《电加工与模具》2010年第B04期64-66,72,共4页Electromachining & Mould

基　　金：北京市教委重点资助项目(KZ200910005006)

摘　　要：为达到特定切缝要求,采用光纤激光器对0.2mm不锈钢薄板进行微细切割,通过对影响切缝的各因素进行试验,找出影响切缝的主要因素和大致参数,再通过正交实验找出达到特定切缝要求的最佳参数。In order to obtain required cutting width, we used fiber laser cutting stainless steel sheet with a thickness of 0.2mm. From the factors that affected the cutting width, we found out the main factor that affected the cutting width and obtained the approximately date what we required. The next step, through the Orthogonal array experiment, we got the best cutting data.

关 键 词：光纤激光 微细切割 不锈钢薄板 

分 类 号：TG665[金属学及工艺—金属切削加工及机床]