Microstructure and Tensile Properties of ZK60 Alloy Fabricated by Simplified Rapid Solidification Powder Metallurgy (S-RS P/M) Process  

作　　者：Zhenya Zhang, Huashun Yu , Shaoqing Wang, Haitao Wang and Guanghui Min Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, China 

出　　处：《Journal of Materials Science & Technology》2010年第2期151-155,共5页材料科学技术（英文版）

摘　　要：This study investigated the microstructures and mechanical properties of ZK60 alloy prepared by a simplified rapid solidification powder metallurgy （RS P/M） processing system （S-RS P/M）, which consists of warm press in dry air and hot extrusion. Microstructure characterizations showed that S-RS P/M alloy consisted of magnesium matrix and oxide stringers of ~1 #m in width. TEM （transmission electron microscopy） observations illustrated nano-size magnesia particles （10-30 nm） constituted oxide stringer in detail. Due to a relatively higher volume of nano-size magnesia particle produced during S-RS P/M process, 0.2% yield strength of S-RS P/M ZKO0 alloy was found to be as high as 382 MPa, which is 10% higher than that of RS P/M alloy. The improvement in mechanical properties is mainly attributed to the combination effects of Orowan mechanism and coefficient of thermal expansion （CTE） mismatch because of the approximately same average grain size.This study investigated the microstructures and mechanical properties of ZK60 alloy prepared by a simplified rapid solidification powder metallurgy （RS P/M） processing system （S-RS P/M）, which consists of warm press in dry air and hot extrusion. Microstructure characterizations showed that S-RS P/M alloy consisted of magnesium matrix and oxide stringers of ~1 #m in width. TEM （transmission electron microscopy） observations illustrated nano-size magnesia particles （10-30 nm） constituted oxide stringer in detail. Due to a relatively higher volume of nano-size magnesia particle produced during S-RS P/M process, 0.2% yield strength of S-RS P/M ZKO0 alloy was found to be as high as 382 MPa, which is 10% higher than that of RS P/M alloy. The improvement in mechanical properties is mainly attributed to the combination effects of Orowan mechanism and coefficient of thermal expansion （CTE） mismatch because of the approximately same average grain size.

关 键 词：MICROSTRUCTURE Mechanical properties Rapid solidification powder metallurgy Nano-size magnesia 

分 类 号：TB383.1[一般工业技术—材料科学与工程]