基于dSPACE的宽带型废气氧传感器控制器设计  

Design of universal exhaust gas oxygen sensor controller based on dSPACE

作　　者：陈佳臻[1] 黄云志[1] 张媛媛[2,3] 徐科军[1,4] 滕勤[5] 谈建[5] 

机构地区：[1]合肥工业大学电气与自动化工程学院,安徽合肥230009 [2]合肥工业大学仪器科学与光电工程学院,安徽合肥230009 [3]安徽大学电子科学与技术学院,安徽合肥230039 [4]工业自动化安徽省工程技术研究中心,安徽合肥230009 [5]合肥工业大学机械与汽车工程学院,安徽合肥230009

出　　处：《传感器与微系统》2010年第3期82-84,88,共4页Transducer and Microsystem Technologies

摘　　要：宽带型废气氧(UEGO)传感器在稀燃发动机混合气空燃比控制中起着极其重要的作用,它在工作过程中的电流和温度等信号需要进行控制。研究了基于dSPACE的UEGO传感器控制器的设计,详细介绍了加热驱动、温度检测及泵电流测量等硬件电路,并利用数字PID实现泵电流的反馈控制。通过在发动机台架上实验,结果表明:设计的控制器能在较宽范围内较好地检测混合气空燃比变化。Universal exhaust gas oxygen（UEGO） sensor is made up of switch type EGO sensor and a pump oxygen cell. Compared with the switch type EGO sensor, UEGO sensor can measures precisely air-fuel ratio （or excessive air coefficientλ ） in wide range and plays an important role in control of air-fuel ratio of lean buring engine. Due to the pumping current and temperature must be controlled, UEGO sensor is a kind of controllable sensor. This paper focuses on the design of dSPACE-based controller. The hardware of heat-driving, temperature measuring and pumping current measuring is introduced in detail. The feedback control of pumping current is implemented by digital PID. The system has been tested by engine testbed. The results show that the controller can effectively detects air-fuel ratio of the exhaust gas in wide range.

关 键 词：宽带型废气氧 控制器 DSPACE 空燃比 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]