内混式扇形空气雾化喷嘴参数分析  

Numerical analysis on fan-shaped air-blast atomizer parameters

作　　者：付祥钊[1] 蒋斌[1,2] 王勇[1] 王子云[1] 

机构地区：[1]重庆大学三峡库区生态环境教育部重点实验室,重庆400045 [2]西南科技大学土木工程与建筑学院,四川绵阳621010

出　　处：《重庆大学学报（自然科学版）》2010年第3期87-91,共5页Journal of Chongqing University

基　　金：国家'十一五'科技支撑计划项目(2006BAJ01A06-3)

摘　　要：采用Eulerian-Lagrangian耦合算法,对内混式空气雾化喷嘴的性能参数进行了数值模拟,结果表明:气液质量流量比为定值时,随着喷嘴孔口宽度的增大,雾化角和液滴的速度逐渐减小,索特尔平均粒径(SMD)不断增大;为了获得更细小的液滴,喷嘴孔口宽度不宜过大;喷嘴孔口宽度为定值时,SMD随气液质量流量比的增加,先逐渐减小,达到极小值后,又逐渐增大,喷嘴孔口宽度为0.6mm时,SMD的极小值约为39.5μm。Based on Eulerian-Lagrangian coupling algorithm,the performance parameters of Fan-shaped air-blast atomizer is simulated.It is shown that when gas-liquid mass flow ratio is constant,the spray angle and velocity of droplet decreases and SMD increases gradually with the increase of orifice width.Therefore,in order to obtain much smaller liquid droplet,orifice width should not be too wide.When the orifice width is constant,along with the increase of gas-liquid mass flow ratio,SMD decreases firstly and increases later when reaching the minimum.And SMD minimum value is 39.5 μm when the orifice width is 0.6 mm.

关 键 词：液体雾化 扇形喷嘴 速度分布 颗粒粒径分布 

分 类 号：TQ027.32[化学工程]