参数化塔机模型有限元分析中的接口技术  

Interfacing Technology in Finite Element Analysis of Parametric Tower Crane Model

作　　者：王良文[1] 王雷[2] 赵北辰 郭志强[1] 潘春梅[1] 

机构地区：[1]郑州轻工业学院机电工程学院 [2]河南森源电气股份有限公司 [3]中国水利水电第十一工程局有限公司

出　　处：《工程机械》2010年第3期35-39,共5页Construction Machinery and Equipment

摘　　要：进行塔机参数化设计时,将参数化设计模型导入ANSYS进行有限元分析需要用到接口技术,由塔机的参数化设计系统得出详尽的参数列表,在VB环境下运用APDL语言编写出命令流,导入ANSYS建立塔机的有限元模型进行有限元分析。以参数化的塔机标准节为例,介绍参数化塔机有限元模型的生成过程。When conducting parametric design of tower cranes, interfacing technology is required during imputing parametric design model into ANSYS to carry out finite element analysis. From the parametric design system of tower cranes, detailed parameters list is obtained. A commands flow is programmed with APDL language in VB environment. Then the all is input into ANSYS and a finite element model is established and finite element analysis is conducted. Taking a parametric standard section of tower crane as an example, forming procedure of a parametric finite element model of tower crane is described.

关 键 词：塔机 有限元 参数化 建模 接口技术 

分 类 号：TH213.3[机械工程—机械制造及自动化]