检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:全玉生[1] 刘赫[1] 李文[1] 李建歧[2] 张学东[3] 彭晓洁[3] 劳国强[3]
机构地区:[1]高电压与电磁兼容北京市重点实验室(华北电力大学),北京市昌平区102206 [2]中国电力科学研究院,北京市海淀区100192 [3]东北电网有限公司,辽宁省沈阳市110006
出 处:《中国电机工程学报》2010年第10期84-91,共8页Proceedings of the CSEE
基 金:国家电网公司科技项目(SGKJ[2007]111)~~
摘 要:双向工频通信系统(two way power frequency automatic communication system,TWACS)下行信号系统的特性由调制信号特性、配电变压器的传输特性和线路的传输特性决定,通过下行调制回路和传输通道幅频特性、相频特性的分析对比,提出各频率特性有效频带的协调配合问题,传输通道的相频特性起决定性作用。推导出在下行调制回路中串入电阻和串入阻容串联电路的调控方法。给出1阶系统电阻的选取公式和2阶系统电阻及电容的选取公式。在满足IEEE暂态电能质量条件下,实现下行信号系统准最优控制。The characteristics of the two way power frequency automatic communication system (TWACS) inbound signal system are decided by the characteristics of modulation loop, distribution transformer and lines. This paper proposed the coordination between different effective frequency bandwidths by comparing to the frequency characteristic of modulation loop and transmission channel. The phase-frequency characteristics of transmission channel play the decisive role in this system. The regulation method which adds series-resistance and RC series circuit to modulation loop is proposed. The selected formula for the resistance of first-order system, and for the resistance and the capacitor of the second-order system are given. The suboptimal controlling method which meets the requirement of IEEE transient power quality is given.
关 键 词:双向工频通信 传输特性 幅频特性:相频特性 准最优控制
分 类 号:TM73[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249