Simulation research on offset field-plate used as edge termination in 4H-SiC merged PiN-Schottky diodes  

作　　者：陈丰平 张玉明 张义门 吕红亮 宋庆文 

机构地区：[1]School of Microelectronics,Key Laboratory of Wide Band-Gap Semiconductor Materials and Devices,Xidian University

出　　处：《Chinese Physics B》2010年第4期394-397,共4页中国物理B（英文版）

基　　金：Project supported by Applied Materials Innovation Fund (Grant No. XA-AM-200702);the 13115 Innovation Engineering of Shaanxi Province,China (Grant No. 2008ZDKG-30)

摘　　要：A new structure of 4H-silicon carbide （SIC） merged PiN-Schottky （MPS） diodes with offset field-plate （FP） as edge termination is developed. To understand the influences of 4H-SiC MPS diodes with offset FP on the characteristics, simulations have been done by using ISE TCAD. Related factors of offset FP have been studied as well to optimise the reverse characteristics of 4H SiC MPS diodes. The simulation results show that the device using offset FP can create a higher blocking voltage under reverse bias as compared with that using field guard rings. Besides, the offset FP does not cause any extra steps in the manufacture of MPS diodes.A new structure of 4H-silicon carbide （SIC） merged PiN-Schottky （MPS） diodes with offset field-plate （FP） as edge termination is developed. To understand the influences of 4H-SiC MPS diodes with offset FP on the characteristics, simulations have been done by using ISE TCAD. Related factors of offset FP have been studied as well to optimise the reverse characteristics of 4H SiC MPS diodes. The simulation results show that the device using offset FP can create a higher blocking voltage under reverse bias as compared with that using field guard rings. Besides, the offset FP does not cause any extra steps in the manufacture of MPS diodes.

关 键 词：4H SiC merged PiN-Schottky offset field-plate reverse characteristics 

分 类 号：TN311.7[电子电信—物理电子学] TN304.24