电解液中Ce(NO_3)_3含量对ZAlSi12合金微弧氧化层特性的影响  

Effect of content of Ce(NO_3)_3 in electrolyte on characteristics of ceramic coating formed by microarc process on ZAlSi12 alloy

作　　者：国春艳[1] 刘向东[1] 张雅萍[1] 车广东[1] 王颖辉[1] 王欢[1] 

机构地区：[1]内蒙古工业大学材料科学与工程学院,内蒙古呼和浩特010051

出　　处：《材料热处理学报》2010年第3期132-135,141,共5页Transactions of Materials and Heat Treatment

基　　金：内蒙古自治区人才开发基金项目(200805)

摘　　要：研究Na2SiO3-NaOH体系电解液中Ce(NO3)3含量在0～0.20g/L范围内变化时对ZAlSi12合金表面微弧氧化陶瓷层组织和厚度的影响。采用SEM、XRD分析微弧氧化处理后陶瓷层的表面形貌和相组成。结果表明:随着Ce(NO3)3含量增加,陶瓷氧化层厚度逐渐增大,电解液中Ce(NO3)3加入量0.15g/L时可获得最大厚度为170μm的陶瓷层;电解液中加入Ce(NO3)3后,膜层仍主要由α-Al2O3和γ-Al2O3相组成,但α-Al2O3相的相对含量增加。Ceramic coatings were obtained by micro-arc oxidation（MAO） on surface of ZAlSi12 alloy in sodium silicate and sodium hydroxide electrolyte with addition of Ce（NO3）3. The effects of contents of Ce（No3）3 in the range of 0～0.20 g/L in the electrolyte on microstructure and thickness of the ceramic coatings were investigated.The surface morphology of the coatings was observed by SEM and phases of the coatings were analyzed by XRD. The results reveal that thickness of the coatings increases with the increase of the content of Ce （NO3）3 in the electrolyte to the maximum value of 170 μm when the content of Ce（NO3）3 is 0.15 g/L. The coatings formed in the electrolyte containing Ce（NO3）3 are still composed of α-Al2O3 and γ-Al2O3 phases, however, the amount of α-Al2O 3 phase increases with the addition of Ce （NO3）3 in electrolyte.

关 键 词：微弧氧化 电解液 Ce(NO3)3 ZAlSi12 陶瓷层 

分 类 号：TG174.4[金属学及工艺—金属表面处理]