基于不等截面拉延筋的冲压工艺及回弹控制  

Forming Process Based on Non-uniform Section Drawbead and Its Application in Springback Control

作　　者：阳春启[1,2] 杨旭静[2] 

机构地区：[1]上海赛科利汽车模具技术应用有限公司,上海201209 [2]湖南大学汽车车身先进设计制造国家重点实验室,湖南长沙410082

出　　处：《湖南大学学报（自然科学版）》2010年第4期27-31,共5页Journal of Hunan University:Natural Sciences

基　　金：国家科技支撑计划资助项目(2007BAF29B01)

摘　　要：提出了一种面向金属薄板拉延成形模具的不等截面拉延筋设计新工艺,该工艺根据冲压件上各部位在成形过程中所需的拉延阻力不同,在相应部位设置不同形状截面的拉延筋,从而使得拉延成形过程各部分材料均得到充分的延展.对该拉延筋的阻力模型进行了分析,以某型号轿车发动机盖零件冲压成形为例,对不同形状的拉延筋对拉延成形质量的影响情况进行了仿真分析.分析结果表明,采用不等截面拉延筋冲压工艺可以有效地控制冲压件的回弹,提高成形件的质量.This paper proposed a new non-uniform section drawbead technique for sheet metal forming process. To generate a desirable drawbead restraining forces,which enable sophisticated workpiece to be drawn properly, a new variable section drawbead was developed according to the formability and the springback characteristics of the blank. The frictional resistant force was simulated to establish a mathematical model. This method was applied to the formation of the hood panel of a passenger car. The example has demonstrated that the new forming process can fully use the blank drawing property to significantly improve the panel quality while the springback of the sheet metal is controlled in a more effective way.

关 键 词：冲压成形 拉延筋 有限元分析 回弹 

分 类 号：TG386.32[金属学及工艺—金属压力加工]