刀座面板注塑模具的设计  

Plastic Injection Mold Design and Optimization of the Block Set Panel

作　　者：施锡鹏[1] 李孙光[1,2] 姚国东[1] 倪利勇[1] 

机构地区：[1]广东海洋大学工程学院,广东湛江524088 [2]广东阳江市三兄刀具有限公司,广东阳江529931

出　　处：《装备制造技术》2010年第4期78-79,共2页Equipment Manufacturing Technology

摘　　要：利用PRO/E和AutoCAD软件设计了刀座面板注塑模具,为实现面板碰穿孔的成形,动模芯采用镶拼组合形式;考虑到刀座质量较小,脱模方向投影面积也不大,采用了一模两腔的形式,以提高生产效率;为满足产品的外观要求,采用了潜伏式浇口;生产试验表明,模具设计可行,效果良好。PRO/E and AutoCAD were adopted to design the plastic mould of block set panel. In order to mould the through holes, the moving die cores are of insert-combination structure. Considering the small mass of the product and the small projection area in the die pulling direction, the one-mould-two-cavity structure was adopted to increase productivity. Submarine gate was adopted to meet the demand of good outlook performance. The practical production proves the feasibility and the effect of the said design.

关 键 词：塑料模 刀座面板 CAD 

分 类 号：TG241[金属学及工艺—铸造]