检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王宝珍[1] 胡时胜[1] WANG Bao-zhen HU Shi-sheng
机构地区:[1]中国科学技术大学中国科学院材料力学行为和设计重点实验室,安徽合肥230026 [2]CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, Anhui, China
出 处:《爆炸与冲击》2010年第1期33-38,共6页Explosion and Shock Waves
基 金:国家自然科学基金项目(10772170)~~
摘 要:波形整形技术使试样满足应力均匀条件和恒定应变率加载,石英片检测试样两端的应力均匀性,获得微弱的透射信号。对开始加载阶段径向惯性效应带来的轴向应力附加值给予了计算修正,得到了肌肉在不同加载方向和不同应变率下的应力应变曲线。结果发现:肌肉材料的应力应变曲线呈现粘弹性材料所具有的凹向上特征,由最小显著差数法进行统计分析,发现猪后腿肌肉的力学性能对应变率和加载方向都敏感。沿纤维方向压缩时肌纤维易发生压缩失稳,强度比垂直纤维方向低。The conventional split Hopkinson pressure bar (SHPB) has some limitations when the specimen is soft tissue. The modifications are necessary to ensure the reliability of SHPB experiment which is based on one-dimensional and uniformity assumptions. Pulse shapers were used to achieve stress equilibrium in specimens and constant strain rates. The quartz crystal force transducers were introduced for checking the dynamic stress equilibrium and obtaining the stress signals. The additional axial stress induced by radial inertia effect at the beginning of the dynamic loading was subtracted with an equation. The stress strain curves for muscles were obtained at various loading directions and various strain rates. The results show that the stress strain curves is concave upward as a viscoelastic material. The least significant difference method is used to explain that mechanical properties of muscle are sensitive to strain rate and loading direction. The compressive strength along the fiber direction is weaker than that along the perpendicular direction because fibers are inclined to buckling when compression loadings are along fiber directions.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229