抽屉导轨中滑轨辊弯成形工艺及CAE分析  

Roll-forming process and CAE analysis of drawer idler slide rail

作　　者：肖小亭[1] 杨东[1] 廖毅娟[1] 

机构地区：[1]广东工业大学材料与能源学院,广东广州510006

出　　处：《锻压技术》2010年第2期31-34,共4页Forging & Stamping Technology

摘　　要：为了获得抽屉导轨辊弯成形合理的工艺参数,针对某一产品的中滑轨,利用理论计算和计算机有限元模拟相结合的方法,进行了分析与计算。结果表明,辊弯成形时需要10道次完成,导轨底部与竖边（S型）的交接处在不同道次上的辊弯角iθ在23°-118°之间。将模拟所得到结果应用到生产实际,可保证辊弯成形的精度要求。In order to obtain some suitable process parameters of a drawer rail in roll forming,the analysis and calculations for the middle slide component of a product were completed using the method of combining theoretical calculation with finite element method simulation.The results indicate that 10 forming passes are needed for roll forming.The roll forming angles（θi） between bottom navigation and S vertical wall in different forming passes are 23°~118°.Applying simulation results to production practice,forming pass precision can meet the requirements of the roll forming.

关 键 词：抽屉导轨 辊弯成形 有限元模拟 孔型设计 

分 类 号：TG386[金属学及工艺—金属压力加工]