气浮装置在化工废水中的应用  

Application of Floatation Equipment in the Treatment of Petrochemical Wastewater

作　　者：田博[1] 

机构地区：[1]辽宁省城市污水处理管理中心,沈阳110033

出　　处：《环境保护科学》2010年第2期11-13,42,共4页Environmental Protection Science

基　　金：国家水体污染控制与治理科技重大专项-辽河河口区陆源污染阻控与水质改善关键技术与示范研究(2008ZX07208-008)

摘　　要：针对某化工集团废水处理及回用工程采用气浮装置预处理化工废水,研究主要对气浮装置的原理、设计参数、药剂投加等进行实践与探讨。运行结果表明,在稳定运行阶段,可实现进水量2083 m3/h。进水CODcr平均浓度为600 mg/L,SS浓度为220 mg/L,石油类平均浓度为50 mg/L,处理出水CODcr≤490mg/L、SS≤46.2mg/L、石油类≤1mg/L。该工艺处理效果稳定,对悬浮物和石油类处理效果显著。Wastewater treatment and reuse project of a Chemical Industry Group pretreats petrochemical wastewater using floatation equipment. The main principles of floatation equipment, design parameters, pharmaceutical dosing were mainly studied and discussed. The results showed that , after the stable operation stage, the average water inflow is 2083 m3/h. While the average inffluent concentration of CODcr is 600 mg/L, SS is 220mg/L, petroleum is 50mg/L, the effluent indexes are COD≤490 mg/L, SS≤46.2mg/L, petroleum≤1 mg/L. The reactor operates continuously and stably, especially for SS and petroleum removal.

关 键 词：化工废水 气浮装置 预处理 

分 类 号：X780.3[环境科学与工程—环境工程]