检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:丁学成[1] 傅广生[1] 梁伟华[1] 褚立志[1] 邓泽超[1] 王英龙[1]
机构地区:[1]河北大学物理科学与技术学院,河北保定071002
出 处:《中国激光》2010年第4期1127-1131,共5页Chinese Journal of Lasers
基 金:国家自然科学基金(10774036);河北省自然科学基金(E2008000631);河北省教育厅科研计划项目(Z2007222);河北省光电材料重点实验室和河北大学自然科学基金资助课题
摘 要:采用蒙特卡罗(Monte Carlo)模拟方法,研究了初始烧蚀粒子总数对其传输中的密度和速度及环境气体密度分布的影响。结果表明,随着烧蚀粒子总数增加,烧蚀粒子高密度峰离开靶的最大距离增大,到距靶最大距离处所用时间,出现先增大后减小的变化,烧蚀Si粒子的速度分布随粒子总数增多而变宽,当粒子总数为1.01×10^(15)和1.01×10^(16)时,出现速度劈裂现象。The influence of the total number of Si particles on the spatial density distribution of the particles(Si and He) and the velocity distribution of the Si-particles is investigated with Monte Carlo simulation.The results indicate that the maximum distance of high density peak from the target and the width of velocity distribution increase,and the time of reaching the maximum distance from the target firstly increases and then decreases with the increase of number of Si-particles.The splitting of the velocity is observed at the vicinity of 1.01×10^(15) and 1.01×10^(16) Siparticles.
关 键 词:激光技术 密度分布 蒙特卡罗模拟 速度分布 高密度峰
分 类 号:TG156.99[金属学及工艺—热处理] O484[金属学及工艺—金属学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.112