基于4f结构平面集成相关器系统优化  

System Optimization of 4f-Based Planar-Integrated Hybrid-Optoelectronic Correlator

作　　者：徐海东[1] 徐平[1] 亓森林[1] 梁钱[1] 张旭琳[1] 黄洁锋[1] 黄海漩[1] 

机构地区：[1]深圳大学电子科学与技术学院,广东深圳518060

出　　处：《光学学报》2010年第4期1002-1008,共7页Acta Optica Sinica

基　　金：国家自然科学基金(60878036);深圳市科技项目(2008008);深圳市微纳光子信息技术重点实验室资助课题

摘　　要：在基于4f结构的平面集成光电混合相关器系统中,由于采用折叠光路结构,增大了像差,降低了系统的识别能力。通过对平面集成光学相关器的结构分析,利用斜入射坐标理论,确定系统中微光学透镜的相位调制函数。对微光学透镜元件的相位函数进行分析,用Zemax软件优化系统以降低系统的像差,从而提高识别能力。通过分析像质评价图,得到优化后的系统最大光程差小于λ/4,达到了衍射极限。用Matlab软件对优化前后的系统进对比量化分析,优化后系统的识别能力提高了约0.8倍。表明优化后的像差得到了很好的改善,系统的识别能力有了明显的提高。The folded optical structure used in l f-based planar-integrated opto-electronic hybrid correlator system. increases aberration and reduces the system＇s recognition ability.The phase modulation function of micro-optical lens is determined,by using the theory of oblique incidence corrdinates to analyse planar integrated optical correlator structure.Then the system aberration is reduced and thereby the recognition ability is enhanced,by analysing the phase function of micro-optical lens elements and using Zemax software optimization system.The optimized system＇s maximum optical path difference is less thanλ/4 and the system attains diffraction limited performance.The contrastive and quantitating analysis is simulated by Matlab,the result show that the optimized system＇s recognition performance has been improved by 0.8 times.It shows that the aberration has been improved well,the system＇s recognition ability has been significantly enhanced.

关 键 词：光学模式识别 结构优化 像质评价 像差分析 二元光学 

分 类 号：TN202[电子电信—物理电子学]