差速机构在纵剪机组废边处理中的应用  

Application of Differential Mechanisms to Waste Edge Handling in Slitting Line

作　　者：张庆跃 

机构地区：[1]鞍山冶金设计研究院,辽宁鞍山114045

出　　处：《钢管》2010年第2期45-47,共3页Steel Pipe

摘　　要：利用差速机构的两个输出轴分别带动纵剪机组中的两侧卷边机来卷曲废边,可使废边在卷曲过程中能够自动调整两侧张力,从而实现废边始终处在等张力状态下卷曲的目的,克服了带钢纵剪机组非张力卷曲和切成碎边存在的缺点,提高了生产效率。Thanks to the solution of using the two output shafts of the differential mechanisms to drive the two lateral coilers of the slitting line to coil the waste edge, the tensions of both sides of the waste edge can be automatically adjusted during the coiling process. As a result, the waste edge is always coiled under a constant tension condition. Thus the shortcomings of the slitting line, i.e., the non-tension coiling and broken edge-causing cutting are overcome, and the shearing productivity enhanced.

关 键 词：纵剪机组 带钢剪切 废边 卷边机 差速机构 等张力卷曲 

分 类 号：TG333.21[金属学及工艺—金属压力加工]