螺旋肋片管与气固多相流传热特性研究  

Heat transfer between helically finned tube and gas solid multiphase flow

作　　者：周劲松[1] 骆仲泱 殷春根[1] 胡国山 高翔[1] 李绚天[1] 倪明江[1] 岑可法[1] 

机构地区：[1]浙江大学热能工程研究所

出　　处：《浙江大学学报（自然科学版）》1998年第2期220-227,共8页

摘　　要：本文在试验的基础上对气固多相流横向冲刷螺旋肋片管的传热特性进行了研究．试验所用物料为平均粒径ｄｐ＝４４μｍ电厂灰和ｄｐ＝１２０μｍ细石英砂，颗粒重量浓度Ｍｓ在０～４．５ｋｇ／ｋｇ范围内．结果表明，螺旋肋片管与气固多相流传热与气流Ｒｅ数、颗粒浓度以及颗粒尺寸均有关，在较细颗粒和较低Ｒｅ数下，气固多相流强化传热程度随颗粒浓度的增加而增加．This paper reports an experimental study on the characteristics of heat transfer for a helically finned tube in a gas solid cross flow.Fine ash and silica sand with average size of 44 microns and 120 microns respectively,are used as test materials.Solid mass loading ratio ranges between 0 and 4.5 kg/kg.It is shown that the heat transfer coefficient is related to the gas based Reynolds numbers, the solid mass loading ratio and particales size.For finer particles and at lower Reynolds numbers,the enhancement of heat transfer due to particles becomes considerably larger as the solid mass loading ratio increases.

关 键 词：强化传热 气固多相流 对流传热 螺旋肋片管 

分 类 号：TK124[动力工程及工程热物理—工程热物理]