检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨冰[1,2] 杨军[1,2] 常在[3] 甘厚义[4] 宋二祥[1,2]
机构地区:[1]清华大学土木工程系,北京100084 [2]清华大学结构工程与振动教育部重点实验室,北京100084 [3]中国建筑设计研究院,北京100044 [4]中国建筑科学研究院地基基础研究所,北京100013
出 处:《岩土力学》2010年第5期1645-1650,共6页Rock and Soil Mechanics
基 金:国家高技术研究发展计划(863计划;No.2007AA11Z113)
摘 要:土石混合体是由作为骨料的砾石或卵石与作为填充料的黏土或砂土组成的特殊工程地质材料,无论天然形成或人工合成,其力学特性与均质土体或岩体相比均有较大差异。以昆明新机场高填方中大量采用土石混合体填料为工程背景,在三维颗粒流程序中对特定的土石混合体试样的侧限压缩试验进行数值模拟,比较了不同级配条件下土石混合体模型的微观结构及基本力学物理性能。通过比较侧限压缩模量和压缩后孔隙率,研究了含石率对土石混合体骨架效应等结构性的影响,并提出了工程中建议采用的土石比例区间,在颗粒流方法用于实际工程方面进行了有益的探索。Soil-aggregate mixture is composed of gravel or cobble as its coarse grain and clay or sand as its filling.Whether natural or man-made,the mechanical properties of this material are widely different from homogeneous and continuous soil or rock.The engineering background of this paper is the high fill of Kunming new airport project in which a large number of soil-aggregate mixtures will be used as filling material.Through the numerical simulation of confined compression tests with 3D particle flow models,we compared the micromechanical fabrication and basic mechanical properties of the soil-aggregate mixture with different grain size distributions.Then we put forward a zone of the ratio of rock to soil which could be used in the project.The influence of different ratios of the stone in the mixture to their fabrication was also investigated.This simulation is a valuable attempt for application of particle flow method to practical engineering project.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117