YKK系列高效高压三相异步电动机的优化设计  被引量:3

Optimal design for the induction motors with high-efficiency and high-voltage of YKK series

在线阅读下载全文

作  者:孟大伟[1] 庞向东[1] 潘波[2] 赵勇[2] 

机构地区:[1]哈尔滨理工大学电气与电子工程学院,黑龙江哈尔滨150040 [2]佳木斯电机股份有限公司技术部,黑龙江佳木斯154002

出  处:《电机与控制学报》2010年第4期31-35,共5页Electric Machines and Control

基  金:国家科技支撑计划重点项目(2008BAF34B04);黑龙江省科技攻关项目(GC07A501)

摘  要:按多规格电机共冲片的设计原则,以追求各规格电机的有效材料成本最低和运行效率最高为混合目标,建立了适用于系列电机优化设计的数学模型。结合电机设计的工程实际,对模拟退火算法进行了适应性的改进。应用所建立的模型和改进算法,对新型YKK系列中型高效高压电机进行了整体优化。计算结果表明,整个系列内各规格电机的效率都提高了1%以上,达到或超过高效电机标准。同时新系列型谱中不仅电机的规格数和容量有所拓展,与原系列相比相同容量的电机被安置在更低的中心高内,电机有效材料的用量也平均减少20%以上。即使考虑到新设计采用了好的导电、导磁和绝缘材料,优化设计的效果还是显而易见的。优化设计结果已经用于实际生产。The mathematic model was established which is suitable for the optimal design of series motors according to the design rule in which several motors are of same core stamping.The lowest effective material cost and the highest efficiency for the every motor were taken for the mix objective.The Simulated Annealing Algorithm was improved in light of the engineering practice of the electric machine design.The integral optimization was made for the new induction motors with high efficiency and high voltage of YKK series.The results show that the efficiencies of all motors in the new series are increased more than 1%,reach or excess the standards of the high-efficiency motors.On the other hand,the number and the rated powers of the motors in new series are expanded.The motor with same rated power is put into smaller frame in new series than old series.The effective materials used for the motors are reduced more than an average of 20%.Even if the better materials of conductor,core and insulation used in the new design are taken into consideration,the effect of the optimum design is obvious.The optimal design results have been applied in the practice engineering.

关 键 词:高效电机 优化设计 模拟退火算法 高压电机 

分 类 号:TM302[电气工程—电机]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象