一种增益增强型套筒式运算放大器的设计  

Design of a gain-boosted telescopic operational amplifier

作　　者：蔡坤明[1] 何杞鑫[1] 陶吉利[1] 丁扣宝[2] 

机构地区：[1]浙江大学宁波理工学院,浙江宁波315211 [2]浙江大学微电子与光电子研究所,浙江杭州310027

出　　处：《电子技术应用》2010年第5期66-69,共4页Application of Electronic Technique

基　　金：宁波市自然科学基金资助(200901A6001064)

摘　　要：设计了一种用于高速ADC中的全差分套筒式运算放大器。从ADC的应用指标出发,确定了设计目标,利用开关电容共模反馈、增益增强等技术实现了一个可用于12bit精度、100MHz采样频率的高速流水线(Pipelined)ADC中的运算放大器。基于SMIC0.13μm,3.3V工艺,Spectre仿真结果表明,该运放可以达到105.8dB的增益,单位增益带宽达到983.6MHz,而功耗仅为26.2mW。运放在4ns的时间内可以达到0.01%的建立精度,满足系统设计要求。A fully differential telescopic OTA used in a high speed ADC was designed. From the ADC＇s design specification, the design objective of the OTA was confirmed. Use the common mode feedback and gain-boosted technique, the OTA can be used in a 12 bit,100 MHz high speed high speed ADC. Based on SMIC 0.13 μm, 3.3 V PDK, Spectre simulation result shows that the OTA has the gain of 105.8 dB and the Unit-Gain-Bandwidth of 983.6 MHz, with only 26.2 mW power consumption. The OTA can achieve 0.01% setting accuracy within 4 ns, which meets the design goals quite well.

关 键 词：套筒式运放 增益增强技术 共模反馈 高速ADC 

分 类 号：TN401[电子电信—微电子学与固体电子学]