不锈钢纤维纺制起绒纬纱的技术要点  

Technical Points of Spinning Fleece Weft by Stainless Steel Fiber

作　　者：庄小兰 

机构地区：[1]厦门兴才职业技术学院

出　　处：《棉纺织技术》2010年第3期47-49,共3页Cotton Textile Technology

摘　　要：为开发出符合使用要求的产业用织物,采用直径12μm的不锈钢纤维与涤纶纤维、棉纤维混纺纺制转杯纺起绒纬纱。根据使用要求合理确定不锈钢纤维混纺比,在生产过程中根据不锈钢纤维的特点,采用不锈钢纤维条与涤纶纤维条并合喂入头并进行牵伸的工艺,采取低速、大隔距、小摩擦等工艺措施,通过优选工艺与纺纱器材,加强操作管理,使纺制出的涤纶棉不锈钢纤维转杯纱满足了用户的使用要求。To develop industrial fabric that fit using demands,stainless steel fiber with 12 μm diameter,polyester fiber and cotton were blended and spun rotor fleece weft. Blending ratio of stainless steel fiber was set according to using demands rationally. According to stainless steel fiber property in production, stainless steel fiber sliver and polyester sliv- er were doubled and fed into breaker drawing. Processing measures of lower speed larger gauge and smaller friction et al were adopted, processing and spinning accessories were optimized, operational management was strengthened, finally the blended yarn quality could reach use demands.

关 键 词：不锈钢纤维 混纺比 纤维长度 并条 摩擦因数 

分 类 号：TS104.2[轻工技术与工程—纺织工程]